Thermal stability of Sm–TM high temperature magnets at 300–550 C

Investigation of thermal stability at 300-550/spl deg/C for the newly developed Sm(Co/sub w/Fe/sub v/Cu/sub x/Zr/sub y/)/sub z/ high temperature magnets is reported in this paper. Three factors are responsible for the irreversible losses at high temperatures. One factor is the loss associated with a nonlinear induction demagnetization curve. This results in significant loss when the magnet is exposed to temperatures higher than the maximum use temperature T/sub M/. Another factor is the surface oxidation, which is more severe with increasing temperature and time at high temperature. Surface oxidation can be reduced by coating with a high temperature ceramic coating. The third factor is the result of metallurgical changes in the magnets. This loss is relatively small in the new magnets, which actually is <2% after 360 hours at 550/spl deg/C. The experiment confirms that coated magnets with T/sub M/ UP to 550/spl deg/C can be expected to have considerable life expectancy and relatively low losses at the intended T/sub M/.

Английский

IEEE Transactions on Magnetics. – 2000. – Vol. 36, № 5. – P. 3291–3293.